PRE-PREG CONVECTION OVEN
Convection oven
+ Energy-saving by three zone segmentation
+ Processing of normal Thermoplastics possible as well.
+ Accessories for processing of Blister forming frames available as an option.
Retain control! - The new PO1200 is the only unit in the O&P field which is able to operate the heating process by the material temperature.
SKU: PO1200
+ Processing of normal Thermoplastics possible as well.
+ Accessories for processing of Blister forming frames available as an option.
Retain control! - The new PO1200 is the only unit in the O&P field which is able to operate the heating process by the material temperature.
The PO1200 convection oven has been developed for the special needs of Pre-Preg processing in the O&P field. The large housing with double doors allows to place multiple hanging moulds inside the oven. A standard 4x vacuum connector is mounted inside the oven. An external water separator is placed at the right side of the housing.
Due to the three zone segmentation the user can adjust the inside dimension of the heating cabinet. Thus the energy consumption is reduced to a minimum when processing smaller moulds. The specific zones are automatically activated by placing the intermediate shelf. If required, the PO1200 Pre-Preg oven can also be used for processing normal Thermoplastics like PE or PP. Dedicated accessories like Blister-forming frames, cradles or teflon coated shelves are available as options.SKU: PO1200
Caractéristiques
- Contrôle par microprocesseur avec fonction PID, optimisé pour le traitement pré-imprégné
- Interface de commande facile d'utilisation avec écran tactile
- Minuterie et option de chauffage par programmation individuelles
- Capteur pour contrôler la température de la matière (moule et matériau)
- Économie d'énergie : 3 zones de segmentation pour réduire les dimensions intérieures de l'armoire chauffante pour les petits moules
- Système de 4 aspirations et séparateur d'eau externe
- Sur 4 roulettes avec arrêt, double portes et deux fenêtres à double vitrage
- Trois zones chauffantes, segmentation par étagère
Spécifications
- Dimensions extérieures: L 1230mm x P 920mm x H 1570mm (48 '' x 36 '' x 62 '')
- Dimensions intérieures: L 1000mm x P 620mm x H 1200mm (39 '' x 24 '' x 47 '')
- 240V / 60Hz / 1 ou 3 Phase / (16 Amp. FEC) / Capacité totale de 10,2 kW
- Chauffage: 3x 3300W, 3 ventilateurs pour le moteur avec direction de rotation inversée
- Température réglable de 30 ° C à 250 ° C,
- Unité de température ° réglable C / ° F,
- Éclairage: 2 x 25 watts
- Couleur: Intérieur : en acier inoxydable Extérieur : peinture noire effet structurel RAL 9005, d’autres couleurs RAL sont disponibles sur demande (en supplément)
- Poids net: 283 lbs (129 kg)
- Poids emballé : 418 lbs (190 kg)
Feature overview
- Microprocessor based control with PID feature, optimized for Pre-Preg processing
- User friendly control interface with touch-panel
- Timer- and Ramp-feature for programming individual heating graphs
- Mould/Material-sensor to control the unit by material temperature
- Energie-saving 3-zone segmentation to reduce inside dimensions of the heating cabinet for small moulds
- Standard 4x vacuum-connector with external water-separator
- On 4 casters with stop, double doors with double-pane viewing
window - Three zone heating cabinet segmentation by intermediate shelf
Specifications
- Dimensions: Outisde: W 1230mm x D 920mm x H 1570mm (48'' x 36'' x 62'')
- Inside: W 1000mm x D 620mm x H 1200mm (39'' x 24'' x 47'')
- 240V / 60Hz / 1 or 3 Phase / (16 Amp. CEE) / total capacity 10,2 kW
- Heating: 3x 3300W, 3x fan motor with reversing rotation diretion
- Temperature infinitely adjustable 30°C to 250°C,
- Temperature unit adjustable °C/°F ,
- Illumination: 2 x 25 watts
- Colour: Inside stainless steel, outside structural effect paint RAL 9005 black, other RAL colours available on request (surcharge)
- Weight net: 283 lbs (129 kg)
- Crated Weight: 418 lbs (190 kg)
Options
- Accessories for processing of Blister forming frames
Resumen de características
- Control por microprocesador con función PID, optimizado para el procesamiento Pre-Preg
- Interfaz de control fácil de usar con panel táctil
- Funciones de temporizador y rampa para programar curvas de calentamiento individuales
- Sensor de molde/material para controlar la unidad según la temperatura del material
- Segmentación en 3 zonas que ahorra energía al reducir las dimensiones interiores del gabinete de calentamiento para moldes pequeños
- Conector de vacío 4x estándar con separador de agua externo
- Sobre 4 ruedas con freno, puertas dobles con ventana de doble
vidrio - Gabinete de calentamiento segmentado en tres zonas mediante repisa intermedia
Especificaciones
- Dimensiones exteriores: 1230 mm de ancho x 920 mm de profundidad x 1570 mm de alto (48'' x 36'' x 62'')
- Interior: 1000 mm de ancho x 620 mm de profundidad x 1200 mm de alto (39'' x 24'' x 47'')
- 240 V / 60 Hz / monofásico o trifásico / (16 A CEE) / capacidad total 10,2 kW
- Calentamiento: 3 x 3300 W, 3 motores de ventilador con rotación reversible
- Temperatura de ajuste continuo de 30 °C a 250 °C,
- Unidad de temperatura ajustable °C/°F,
- Iluminación: 2 x 25 W
- Color: interior de acero inoxidable, exterior con pintura de efecto estructural RAL 9005 negro; otros colores RAL disponibles bajo pedido (con recargo)
- Peso neto: 283 lb (129 kg)
- Peso con embalaje: 418 lb (190 kg)
Opciones
- Accesorios para el procesamiento con marcos de formado de blíster
Accessories
Votre snippet dynamique sera affiché ici... Ce message est affiché parce que vous n'avez pas défini le filtre et le modèle à utiliser.
Alternative products
Your Dynamic Snippet will be displayed here...
This message is displayed because youy did not provide both a filter and a template to use.